- On-Load Tap Changer
-
D-energized tap changer
- De-energized plate tap changer all excellent
- De-energized WDT. W(1+2) linear tap changer(110KV or less) all excellent
- De-energized drum cylindrical tap changer all excellent
- De-energized manual cage tap changer
- Off circuit cage type tap changer
- De-energized linear tap changer
- Off circuit disc type tap changer
- Controller In General
- Transformer Attachment
JLK-103D3 OLTC controller for oil immersed transformer
The on-load switching controller, the on-load tap switch and the on-load tap changer produced by our company may constitute the power supply system of automatic voltage regulation which enables the voltage of the power supply to be stabilized within the required range of the user and guarantees that the voltage of the power supply will not be affected by the external voltage fluctuation and load change that improves the quality of the power supply and the safety of the electric equipment.
As a kind of automatic device, this controller controls the switch operation of the on-load tap-changer through the electro-control mechanism attached on the on-load tap-changer which achieves the purpose of the loaded automatic regulating voltage.
The controller is set with functions of under voltage protection, overcurrent atresia, alarm output etc to ensure the safe operation of the on-load tap-changer.
The controller may conduct the setting for the parameters of setting voltage, setting accuracy, delay time, unit address etc. by the soft touch of the button.
The controller may display the sampling voltage, number of runs, operation position and the effective stall.
The controller has the function of online oil filter for which the oil pump can be started manually or automatically. When it is started automatically, the oil filter pump may be controlled for the start and stop in accordance with the number of voltage regulation.
- 2.1 The ambient air temperature should not be lower than -10C, and not higher than +60C;
- 2.2 The relative humidity of the air should not be larger than 85%;
- 2.3 The altitude should not be higher than 2000m;
- 2.4 No significant vibrations and shock site;
- 2.5 No medium with the danger of explosion, no containment of the corroding metal and the gas that damages insulation or conductive dust for the surrounding medium;
- 2.6 No site with the erosion of snow and rain








